Description

*Plus .003 minus .000
**Minimum Hole Depth, insert length plus .020
Other lengths available upon request

Thread Spec. Per MIL-S-7742
Brass per ASTM-B-16/16M-19
300 Series: QQ-A-764B ASTM A581/A582-12/A484-18A
Dimensional Limits ±.005, unless specified
When installing inserts into a boss, the minimum diameter of the boss should be at least 2 times the diameter of the insert
Class 3A/4H screw must pass with finger torque, but basic go gauge may stop at last thread

(Applies to Stainless Steel Only)
Metric Example: SWLM5
Also Available in Stainless Steel Example: SWL832SS
Also Available with Stud

Part Number	Metric Part Number	A	B	C	Pin Data
Part Number	Metric Part Number	A	B	C	G*	H**
SWL256	SWLM2	.140	.156	.121	.126	.176
SWL440	SWLM3	.181	.225	.152	.157	.246
SWL632	SWLM3.5	.219	.281	.184	.188	.301
SWL832	SWLM4	.248	.320	.218	.222	.340
SWL1024	–	.276	.375	.249	.252	.400
SWL1032	SWLM5	.276	.375	.249	.252	.400
SWL25020	SWLM6	.342	.500	.312	.315	.525
SWL25028	–	.342	.500	.312	.315	.525
SWL31218	SWLM8	.400	.500	.373	.377	.525
SWL31224	–	.400	.500	.373	.377	.525
SWL37516	SWLM10	.500	.500	.465	.468	.525
SWL37524	–	.500	.500	.465	.468	.525
Plus .003 minus .000 *Minimum Hole Depth, insert length plus .020 Other lengths available upon request.

Additional information

Units	American, Metric
Thread Size	2-56, 4-40, 6-32, 8-32, 10-24, 10-32, 1/4''20, 1/4''28, 5/16''18, 5/16''24, 3/8''16, 3/8''24, M2x0.4, M3x0.5, M3.5×0.6, M4x0.7, M5x0.8, M6x1.0, M8x1.25, M10x1.5
Material	Brass, Stainless Steel