Description

*Plus .003 minus .000
**Minimum Hole Depth, insert length plus .020
Other lengths available upon request

Thread Spec. Per MIL-S-7742
Brass per ASTM-B-16/16M-19
Dimensional Limits ±.005, unless specified
When installing inserts into a boss, the minimum diameter
of the boss should be at least 2 times the diameter of the insert

Metric Example: SWLHM5
Also Available with Stud
Also Available with Different Knurl Configurations

Part Number	Metric Equiv.	A	B	C	D	Pin Data
Part Number	Metric Equiv.	A	B	C	D	G*	H**
SWLH256	M2x0.4	.188	.156	.121	.018	.126	.176
SWLH440	M3x0.5	.219	.225	.152	.021	.157	.246
SWLH632	M3.5×0.6	.250	.281	.184	.027	.188	.301
SWLH832	M4x0.7	.281	.320	.218	.033	.222	.340
SWLH1024	M5x0.8	.313	.375	.249	.040	.252	.400
SWLH1032	–	.313	.375	.249	.040	.252	.400
SWLH25020	M6x1.0	.375	.500	.312	.050	.315	.525
SWLH25028	–	.375	.500	.312	.050	.315	.525
SWLH31218	M8x1.25	.438	.500	.373	.050	.377	.525
SWLH31224	–	.438	.500	.373	.050	.377	.525
SWLH37516	M10x1.5	.562	.500	.465	.065	.468	.525
SWLH37524	–	.562	.500	.465	.065	.468	.525
Plus .003 minus .000 *Minimum Hole Depth, insert length plus .020 Other lengths available upon request.

Additional information

Units	American, Metric
Thread Size	2-56, 4-40, 6-32, 8-32, 10-24, 10-32, 1/4''20, 1/4''28, 5/16''18, 5/16''24, 3/8''16, 3/8''24, M2x0.4, M3x0.5, M3.5×0.6, M4x0.7, M5x0.8, M6x1.0, M8x1.25, M10x1.5
Material	Brass